LWGY Flüssig-Turbinen-Durchflussmesser / Durchflussmesser Wasserstoff
Lieferzeit: | 3 Tage |
---|
Verpakung: | Karton, Holz |
---|---|
Marke: | PCAI |
Ort Von Zukunft: | Liaoning, China (Festland) |
Basisinformation
Modell: LWGY Series
Produktbeschreibung
Für Flüssig (Wasser, Diesel, Benzin)
Hohe Genauigkeit: 1,0% oder 0,5% oder rate
DN4 bis DN200
LWGY Flüssig-Turbinen-Durchflussmesser / Durchflussmesser Wasserstoff
SPEZIFIKATIONEN
Performance
Wiederholbarkeit: ± 0,2%
Genauigkeit: Standard: ± 1% vom Messwert, optional: ± 0,5% vom Messwert
Medienberührte Komponenten
Gehäuse: Standard - 304 Edelstahl Optional - 316 Edelstahl
Lager und Welle: Wolframkarbid
Rotor: Standard - 2Cr13 Edelstahl
(Optionale Legierung CD4Mcu)
Sicherungsringe: 316 Edelstahl
Ausgangssignal: (falls zutreffend)
Sensor: Impulssignal (Low Level: ≤0.8V; High Level: ≥8V)
Transmitter: 4 bis 20 mA Gleichstromsignal Signal Getriebeabstand: ≤1.000 m
Elektrische Anschlüsse: Grundausführung: Hausman Steckverbinder oder 3-adriges Kabel
Explosionsschutzart: ISO M20 × 1,5 Buchse
Explosionsbeweis:
Standard: Keine
Optional: ExdIIBT6
Schutzstufe: IP65
BETRIEBSBEDINGUNGEN
Umgebungs:
Temperatur: -10 ° C bis + 55 ° C
Druck: 86 bis 106 KPa
Relative Luftfeuchtigkeit: 5% bis 90%
Energieversorgung:
Sensor: + 12V DC (optional: + 24V DC)
Sender: + 24V DC
Feld Anzeige Typ B:
Integrierte 3.2V Lithium Batterie (Andere auf Anfrage)
Feld Anzeige Typ C:
+ 24V DC
Flüssigkeitstemperatur und Druck:
Temperatur:
-20 ° C bis + 110 ° C
Druck:
Der Flüssigkeitsdruck sollte nach der Bewertung begrenzt werden.
Datenblatt für optional:
|
|
|
|
|
Description |
||||
Type |
A |
|
|
|
|
Flow sensor pulse output three-wire system, +12V power supply; |
|||
B |
|
|
|
|
Local display, powered by 3.6V battery; |
||||
C |
|
|
|
|
Local display with 4~20mA or pulse output, powered by 24V; |
||||
D |
|
|
|
|
Flow transmitter 4~20mA output, powered by ,24V; |
||||
Nominal drift diameter |
4 |
|
|
|
Normal flow range m3/h |
0.04~0.25 |
Extended flow range m3/h |
0.04~0.4 |
|
6 |
|
|
|
0.1~0.6 |
0.06~0.6 |
||||
10 |
|
|
|
0.2~1.2 |
0.15~1.5 |
||||
15 |
|
|
|
0.6~6 |
0.4~8 |
||||
20 |
|
|
|
0.8~8 |
0.45~9 |
||||
25 |
|
|
|
1~10 |
0.5~10 |
||||
32 |
|
|
|
1.5~15 |
0.75~15 |
||||
40 |
|
|
|
2~20 |
1~20 |
||||
50 |
|
|
|
4~40 |
2~40 |
||||
65 |
|
|
|
7~70 |
3.5~70 |
||||
80 |
|
|
|
10~100 |
5~100 |
||||
100 |
|
|
|
20~200 |
10~200 |
||||
125 |
|
|
|
25~250 |
12.5~250 |
||||
150 |
|
|
|
30~300 |
15~300 |
||||
200 |
|
|
|
80~800 |
40~800 |
||||
Explosion protection |
|
|
|
Not marked, without explosion protection |
|||||
B |
|
|
Explosion protection type |
||||||
Precision class |
A |
|
Precision: Class 0.5 |
||||||
B |
|
Precision: Class 1.0 |
|||||||
Turbine type |
A |
Normal flow range |
|||||||
B |
Extended flow range |
||||||||
Note: Sensors with pipe diameter of DN4~DN40 are of thread connections with maximum operating pressure of 6.3Mpa. Sensors with pipe diameter of DN50~DN200 are of flange connections with maximum operating pressure of 2.5Mpa. Sensors with pipe diameter of DN4~DN10 are provided with front and rear straight pipe sections and filters. Please specify when placing an order if flange connections are required for pipe diameter of DN15~DN40. Please specify when placing an order for high pressure type and special requirements. |
Produktgruppe : Turbinen-Durchflussmesser
Premium Related Products